8 Maintenance Tips for Commercial Lighting Systems
8 Maintenance Tips for Commercial Lighting Systems
Maintaining commercial lighting systems is crucial for enhancing energy efficiency, reducing operational costs, and ensuring a safe and well-lit environment. Proper upkeep not only extends the lifespan of your lighting fixtures but also helps avoid unexpected breakdowns or costly repairs.
Whether you manage an office, warehouse, or retail space, adhering to regular maintenance practices can improve the overall performance of your lighting system. Here are 8 commercial lighting maintenance tips.
PrierieTech Technology Constractor
Serving Fargo – Moorhead and the surrounding areas
Always Minimize Safety Hazards
Safety should always come first when working on electrical lighting systems. Make sure you turn off the power at the breaker box and follow lockout/tagout procedures to de-energize any circuit before performing maintenance or any tasks. As there are some safety hazards that is why you should always choose permanent lights for your businesses.
- Always wear insulated gloves and use tools rated for use at voltage levels appropriate to the situation.
- Maintaining lighting systems is an integral responsibility of businesses, organizations, and facilities.
- A proper preventive maintenance strategy can improve performance and energy efficiency while minimizing disruptions and prolonging the lifespan of the lighting fixture.
Following these proper lighting maintenance tips can keep your system performing at its best. So continue reading to discover more!
Here is a guide for Smart Home Automation Maintenance
Inspecting for Burnt-Out Light Bulbs Frequently
Faulty lighting systems typically reveal themselves first through burnt-out bulbs. Regularly replacing these lights ensures the system always has enough light for safe operation and efficient performance.
Flickering or strobing lights could indicate that your system has an issue with its transformer, electrical panel, or wiring harnesses. A multimeter can help track down its source; switching out switches or harnesses is far cheaper than rewiring entire building areas.
Clean fixtures regularly to remove dust build-up that can compromise their effectiveness or even cause it to fail. Furthermore, ensure all switches, dimmers, and timers function as designed.
Check the Ballast
Ballasts that begin to malfunction produce higher voltage levels and could send out surges of current, causing bulbs to burn out or even explode, rendering them inoperable.
- At a maintenance inspection, a technician can install new ballasts to restore the full functionality of light fixtures.
- This can improve overall system performance while simultaneously conserving energy by increasing the energy input-to-light output ratio.
- Before using a multimeter to check a ballast, ensure both switches have been disabled and the fixture opened up.
- Be mindful not to touch either the multimeter probe or any live wires while performing this inspection.
Upgrading Outdated Fixtures for Energy Efficiency
Lighting systems serve an integral purpose for businesses, from increasing productivity and creating an inviting atmosphere to energy savings. To maintain their efficiency and ensure their safety, commercial lighting systems must undergo periodic checks for wiring security to ensure effectiveness and tight connections.
Inspect the wiring visually for any signs of physical damage, overheating, or discoloration. Then, use a multimeter to conduct a continuity test on the circuit you are testing. Turn off the power to this circuit and switch your multimeter into continuity mode.
Touch one end of the wire to the multimeter probes and the other to the ground. If continuity readings appear on both, the circuit should be functioning normally.
Here are the Benefits of Commercial Security
Simplifying Home Ownership
Free Consultations | Veteran Discounts | 30 Years of Experience
Inspect and Repair Any Connection Damage
Lighting systems are an essential element of any commercial space. They offer productivity boosts, aesthetic enhancement, and a welcoming atmosphere for visitors or clients. But like any system, they require ongoing maintenance to maximize functionality and lifespan.
Preventive commercial lighting maintenance plans help:
- Organizations optimize the energy input-to-light output ratio
- Extend fixture and component lifespans
- Lower energy costs while preventing minor problems from snowballing into costly repairs or replacements.
Remember to prioritize electrical safety when performing maintenance on a commercial lighting system and use lockout/tagout procedures correctly. In addition, use gloves rated for working on that specific voltage system and utilize a voltage tester to verify that all power has been turned off before commencing.
Regular Cleaning of Light Fixtures
Though it may seem obvious, all fixtures must be included in your regular LED lighting maintenance checks. Dirty fixtures can make a poor first impression with customers or clients and hinder your lighting system’s ability to illuminate workspaces effectively.
Dust can build up on bulbs and diffusers, shortening their lifespan and diminishing their brightness. It is, therefore, important to regularly clean and dust fixtures and adjust any misdirected adjustable LED lights over time.
Always wear appropriate personal protective equipment when performing electrical maintenance, such as insulated gloves rated to match the voltage of your lighting systems and safety glasses, to stay safe and prevent electrical hazards from emerging. This will keep you safe while working and help ensure no accidents arise as a result of performing maintenance work on them.
Replacing Inefficient Lighting with LEDs
Flickering or dimming lights could indicate electrical problems. Schedule regular inspections to keep LED lighting fixtures, bulbs, and controls functioning properly and reduce energy consumption and operational costs. By maintaining them regularly, you’ll ensure their optimal functioning while cutting energy usage costs significantly.
Use a light meter to assess lighting levels across different areas of your space. Consistent lighting levels help employees complete tasks more quickly while providing a more pleasant working environment and preventing accidents caused by poor contrast or glare. Furthermore, this step ensures compliance with OSHA standards for lighting.
Check the Lighting Controls
Lighting systems play an essential role in commercial and residential settings, yet require regular upkeep for maximum effectiveness and minimal disruptions to extend their lifespan. A proactive approach ensures maximum efficiency with minimal disruptions while increasing the lifespan of any given system.
Proper maintenance of commercial lighting involves inspecting any preset functions, such as timers or dimmers, and checking for faulty wiring that could pose a fire hazard or cause the lights to suddenly shut off unexpectedly.
Lighting systems can be complicated, but regular inspection schedules can significantly lower maintenance costs and energy consumption. Regular inspections allow both time and money savings by identifying issues and expediently resolving those identified quickly and effectively.
Conclusion
Maintaining commercial lighting systems is essential for ensuring both energy efficiency and operational safety. Prioritizing regular upkeep helps avoid expensive repairs and contributes to a well-lit and welcoming commercial space.
Best Commercial Lighting Maintenance | PrairieTech
Ensure your commercial lighting system stays efficient, safe, and reliable with our expert maintenance services! At PrairieTech, we specialize in proactive lighting maintenance that reduces energy costs, extends the lifespan of your fixtures, and keeps your workspace well-lit.
We are offering Home Security, Home Theatre, and Home Automation services. If you are planning to decorate your house outdoors for a holiday, then we are offering permanent holiday lighting installation as well. Contact us today!